F500 F508刷机教程
1：首先确定的是F500的刷机平台是：[VISTA]U-Medic_v1[1].3.3.exe
2完整的资料应该是有 CP 与 AP 部分。
3：AP部分包含2个txt 文档 和 3个bin文件 以及fnt文件一个 cod文件一个 lst文件一个 out文件一个 。
4：CP部分包含AppResource与build文件夹.。其中AppResource里面应该是TFS4_Resources文件夹里面有个SECUMTS_rsc.bin文件!!！！
'build文件夹里面是ms文件夹，打开之后会有个bin 文件夹 在打开bin 后会有VIS_SLAV文件夹
然后里面全部是mbn 文件！！
5：正确的rom 应该是这样的 大家下载rom 一定要看资料是否完整，或者文件夹不对，然后必须进行重新添加与编辑。
[-page-]
下面是教程:
1：Then, check the every "check box" which is "Erase NAND", "Change Boot Area",
"Code" and "Resource".
2. Click the Broswer button and select the folder. (Sel
3. Connect the download cable to the mobile.
Turn on the mobile phone pushing the "4" button at the same time.
When the phone is ready to download, you will see the "Ready...", Click the
"Download" button.
If not, you have to install the samsung usb modem driver.
4. When downloading is finished successfully, there is a pop up message
"DOWNLOAD COMPLETE"
5. With booting the phone, AP NAND format on the idle status.
*#62367#
6. AP download with only check the SPL and Click the Broswer button
7. After completing download, click the every check box, "SPL", "COD", "FNT" and "FS"
8. Confirm the downloaded version name and etc. :
*#1234#
Full Reset :
*2767*3855#
2完整的资料应该是有 CP 与 AP 部分。
3：AP部分包含2个txt 文档 和 3个bin文件 以及fnt文件一个 cod文件一个 lst文件一个 out文件一个 。
4：CP部分包含AppResource与build文件夹.。其中AppResource里面应该是TFS4_Resources文件夹里面有个SECUMTS_rsc.bin文件!!！！
'build文件夹里面是ms文件夹，打开之后会有个bin 文件夹 在打开bin 后会有VIS_SLAV文件夹
然后里面全部是mbn 文件！！
5：正确的rom 应该是这样的 大家下载rom 一定要看资料是否完整，或者文件夹不对，然后必须进行重新添加与编辑。
[-page-]
下面是教程:
1：Then, check the every "check box" which is "Erase NAND", "Change Boot Area",
"Code" and "Resource".
2. Click the Broswer button and select the folder. (Sel
3. Connect the download cable to the mobile.
Turn on the mobile phone pushing the "4" button at the same time.
When the phone is ready to download, you will see the "Ready...", Click the
"Download" button.
If not, you have to install the samsung usb modem driver.
4. When downloading is finished successfully, there is a pop up message
"DOWNLOAD COMPLETE"
5. With booting the phone, AP NAND format on the idle status.
*#62367#
6. AP download with only check the SPL and Click the Broswer button
7. After completing download, click the every check box, "SPL", "COD", "FNT" and "FS"
8. Confirm the downloaded version name and etc. :
*#1234#
Full Reset :
*2767*3855#
